|
|
 |
|
|
|
|
Product Code |
White 600899
Ivory 600905
Gray 600912
Light Brown 600929
Brown 600936
Dark Brown 600943 |
|
Size |
|
7cm x 17cm |
|
Contents |
|
250g |
|
Main Ingredients |
|
Water base acrylic resin |
|
Country of Origin |
|
Japan |
|
 |
The product is
a water base, odorless and non-toxic acrylic
filler suitable for various kinds of
materials. As elasticity can be maintained
after the filler harden, it makes possible
to flexibly fit with different kinds of
material. Paint can also be applied on top
of the filler.
Standard usage volume: Approx. 7metre
(W: 5mm x T: 5mm basis) |
|
|
 |
|
Repair of
crack on inside and outside walls, crack on
tile’s joint wall, wallpaper’s joint part,
space between wall and pillar, space between
floor and wall etc |
|
|
 |
|
1. |
Remove dust, oil, rust and
dirt on the part where
product is applied then dry
well. |
|
2. |
It is recommended to use
masking tape to cover up
surrounding area of product
application for better
result. |
|
3. |
Take off the tube’s white
cap and cut the edge by
cutter. In case that the
place’s width is narrow,
replace nozzle with the
enclosed attachment. |
|
4. |
Remove inner stopper before
usage. |
|
5. |
Fill up the place by the
product then use wet spatula
etc to make surface flat. |
|
6. |
After usage, remove masking
tape immediately. Wipe off
remaining filler on the
nozzle’s edge and keep the
product with the original
cap. |
|
7. |
In case that paint will be
applied on top of the
filler, apply after product
is completely dry. |
| |
|
Harden time:
(Surface) Approx. 1 hour
(Inner part) Approx. 10 hours
Drying time:
(Summer) no less than 3 days
(Winter) no less than 5 days |
|
|
|
|
|
|
|
|
